Patient IDs at the Feb09 Connectathon
From IHEWiki
Connectathon Managers provide tools the participants use to generate Patient IDs during connectathon testing. Different tools are used for different purposes. This page summarizes their use for
- Radiology and Cardiology workflow profiles
- XDS.a, XDS.b and XCA testing
- PCD testing
Contents |
[edit]
Overview
- Recorded webex on Connectathon Patient IDs: <link to be added>
- Power Point on Patient Identifiers at the 2009 North America Connectathon
- Notes on Patient IDs with PIX & PDQ v2
[edit]
Departmental workflow: Radiology SWF, MAWF and Cardiology CATH, ECHO, Stress
- ADT system is the source of Patient IDs in Rad and Cardio workflow profiles
- In absence of enough ADTs, we provide the RIS Mall tool to generate HL7v2.3.1 ADT messages.
- RIS Mall configuration info: see Kudu under Configuration-->Network...Configuration
- RIS Mall user manual: http://ihe.wustl.edu/ris_mall/doc/RIS_Mall_Users_Guide.pdf
- RIS Mall can also create orders (HL7vv2.3.1 ORMs) and DICOM Modality Worklist
- You can practice using RIS Mall prior to the connectathon: http://ihe.wustl.edu/ris_mall/doc/index.php
[edit]
XDS.a, XDS.b, XCA
- At the connectathon, we create a single XDS Affinity Domain for all XDS Registries and a single 'Master' Assigning Authority for Patient IDs. See: Patient ID Assigning Authority values for the connectathon
- Document Sources which cannot create their own local IDs can use the HIMSS Registration tool to obtain a patient ID.
- The HIMSS Registration Tool is pre-loaded with these patients: Media:Feb09-demographics.xls You can also use the tool to create your own patients.
- Recorded Webex - Using the HIMSS Registration Tool
- You can practice using the HIMSS Registration tool prior to the connectathon: http://128.252.175.111/
- To access the HIMSS Registration tool at the connectathon: http://himss-registration.ihe.net (10.242.0.202 - only available at the Hyatt)
- If you need an A04 feed sent to your sytem during the Connectathon, you need to contact Dave Maffitt at MIR to get configured in the tool. Contact Steve Moore if you do not have Dave's email address.
[edit]
PCD testing
- To be completed
